mountable.io CLI

mountable mounts a mountable.io filesystem, a shared POSIX filesystem for agents and teams, on any Linux machine or agent sandbox and on a Mac (macOS 26, Apple Silicon), and manages filesystems, mount tickets and sessions. It is also an MCP server.

npx -y mountable-cli login                          # npm
uvx mountable login                                 # PyPI
curl -fsSL https://mountable.io/install.sh | sh     # standalone binary

The CLI is one self-contained binary: it downloads nothing at mount time and keeps the session's credentials in memory. Mounting needs FUSE (/dev/fuse) on Linux; on macOS it needs nothing else installed and no sudo (see macOS).

Authentication

• People: mountable login signs this machine in with a device flow.
• Backends and agents: set MOUNTABLE_API_KEY=mtbl_…. An API key belongs to one organisation, and the commands use it.
• Sandboxes: need no credentials, only a one-time ticket on stdin.

Commands that work inside an organisation take --org ORG_ID, then MOUNTABLE_ORG, then the only organisation the caller has; with several, they fail with org_required.

Commands

Command	Does
mountable orgs list	the caller's organisations
mountable fs list	filesystems
mountable fs create NAME [--spending-cap-cents N] [--mutations-per-minute N] [--byte-quota BYTES] [--entry-quota N]	create a filesystem, with the limits given; prints its ID
mountable fs get FS_ID	a filesystem and its limits
mountable fs update FS_ID [--spending-cap-cents N|none] [--mutations-per-minute N|none] [--byte-quota BYTES] [--entry-quota N]	change only the limits given (at least one); none removes the spending cap or restores the default mutation rate
mountable fs usage FS_ID	stored bytes and files against quotas, 30-day traffic
mountable ticket create FS_ID [--ro] [--idempotency-key KEY] [--max-duration D]	a one-time mount ticket for a sandbox; the session lasts D (such as 12h or 720h; default 12 hours, at most the API key's or login's expiry)
mountable sessions list FS_ID	live mount sessions
mountable sessions revoke SESSION_ID	revoke a session; its mount stops
mountable files write FS_ID PATH [--from FILE] [--if-match ETAG] [--if-none-match]	write a whole file from FILE or stdin; prints path etag size
mountable files read FS_ID PATH [--to FILE]	the file's bytes on stdout, or into FILE (then prints path etag size)
mountable files delete FS_ID PATH [--if-match ETAG]	delete a file, symlink or empty directory
mountable files list FS_ID [PATH] [--after NAME] [--limit N]	one page of a directory; a note on stderr gives the --after for the next
mountable files changes FS_ID [--cursor CURSOR] [--wait SECONDS]	without --cursor, the current cursor at once; with it, the changes after it, waiting up to --wait seconds (default 25) for one
mountable webhooks create FS_ID URL [--path-prefix PREFIX]	a webhook for changes under PREFIX (default /); prints its signing secret
mountable webhooks list FS_ID	webhooks, their state and last failure
mountable webhooks delete FS_ID WEBHOOK_ID	delete a webhook
mountable webhooks rotate-secret FS_ID WEBHOOK_ID	a new signing secret; prints it
mountable webhooks enable FS_ID WEBHOOK_ID	turn a disabled webhook back on
mountable mount [--ro] FS_ID DIR	mount with your login
mountable mount --ticket-stdin DIR	mount with a ticket read from stdin
mountable unmount DIR	unmount; on Linux, pending writes are committed
mountable mcp	MCP server over stdio
mountable login, logout, version, licenses

Deleting a filesystem is done in the console.

The API checks the limits' ranges: --spending-cap-cents 0 to 1,000,000,000 (cents a month), --mutations-per-minute 1 to 1,000, --byte-quota 1 byte to 100 GiB, --entry-quota 1 to 1,000,000; the quotas cannot be removed. fs create and fs update refuse an API key limited to one filesystem (key_limited_to_filesystem) and need the key's creator to be an owner or admin. fs update and every webhooks command need read-write access to the filesystem. A webhook URL must be https:// on port 443 with a public host (bad_url), a path prefix / or a directory (bad_path); a filesystem has at most 5 webhooks (webhook_limit), and a webhook whose creator lost access cannot be enabled again (access_revoked): create a new one. An API key lists and revokes only its own sessions.

The files commands use the files API without mounting, with your login or the API key: each creates a token session for itself (ro for read, list and changes, rw for write and delete), keeps its token in memory and revokes it at the end; if that fails, a note says so and the session expires within the hour. Paths are encoded per segment; a . or .. segment fails with bad_path before any request.

Output, errors and exit codes

• --json on every command writes one JSON document to stdout, with the API's field names (help --json writes {"usage": …}). Diagnostics go to stderr. Nothing ever prompts. The exception is mountable mcp, whose stdout is the MCP protocol.
• files read without --to writes the file's bytes to stdout, so it takes --json only with --to (then it prints the file's path, type, size, etag and modified_at). files list --json writes {"entries":[…],"next":…}, files changes --json {"events":[…],"cursor":…}, files delete --json {"path":…,"deleted":true}.
• mountable mount --json writes JSON lines as the mount progresses: {"event":"mounted","path":…,"filesystem_id":…,"mode":…} once the mount is usable, and {"event":"unmounted","reason":"signal|unmount|revoked|expired|error","detail":…} when it ends. Wait for mounted before using the directory.
• Exit codes: 0 success; 1 an error from the API, network, mount or credentials; 2 wrong usage.
• Errors carry a stable code and a next step: on stderr, or with --json as {"error":{"code":…,"message":…,"hint":…}} on stdout. For example, unauthenticated (run mountable login or set MOUNTABLE_API_KEY), org_required (pass --org), not_found (check the ID with mountable fs list), payment_required (the hint is the console's billing link), rate_limited (wait retry_after seconds).
• precondition_failed (an --if-match or --if-none-match that did not hold) carries current_etag: the file's ETag, or null when nothing exists there; the hint names it.
• The one-time ticket appears only in the result of ticket create, and a webhook's signing secret (whsec_…) only in the result of webhooks create and webhooks rotate-secret: alone on stdout, with the webhook's ID on stderr, or in the JSON answer. API keys, login and session tokens, certificates, tickets and webhook secrets never appear in errors or logs.

Retries

• The CLI never retries on its own.
• Reads (list, get, usage, files read, files list, files changes, webhooks list) are safe to retry.
• ticket create sends an idempotency key: the one given with --idempotency-key, or a random one it prints to stderr before sending. Retry with the same key after a timeout. When the outcome is unknown (network_error or outcome_unknown), the error's idempotency_key is the key that request was sent with: retry with exactly that key. A replay returns the existing session without a ticket:
  • still requested: its ticket was lost. The CLI revokes that session, creates a new one with a fresh key and reports both session IDs (replaced_session_id).
  • active or later: the ticket was used. The CLI revokes nothing and fails with ticket_already_used; use a new key for another mount.
• fs create has no idempotency key, and names need not be unique. After a timeout, run fs list and look for the name before creating again.
• fs update sets the values given, so repeating it changes nothing more.
• files write and files delete with --if-match or --if-none-match fail with precondition_failed rather than undo a change made since; a repeat after an unknown outcome can fail that way because the first one succeeded, so compare current_etag with the file you wrote.
• webhooks create is not idempotent: after an unknown outcome, run webhooks list before creating again. webhooks rotate-secret issues a new secret each time; after an unknown outcome, rotate again and use the secret it prints. webhooks delete after a lost answer answers not_found. webhooks enable is safe to repeat.
• sessions revoke is idempotent.
• On HTTP 429 (rate_limited), wait retry_after seconds.

Files limits

• files read to stdout streams the file: if the download breaks off, the command fails (exit 1) and the bytes already written are incomplete. With --to FILE, FILE is replaced only once the whole file arrived.
• files write reads stdin fully before sending, so its length is known; --from FILE streams a regular file with its size.
• Each request has 60 seconds, the transfer included (files changes: 60 seconds plus --wait).

Agent workflow

The backend holds the API key; the sandbox gets only a ticket.

# Backend
export MOUNTABLE_API_KEY=mtbl_…
FS_ID=$(mountable fs create agent-workspace)
mountable ticket create "$FS_ID" --idempotency-key job-42 --json   # → {"ticket": "mtbltk_…", …}

# Sandbox, with the ticket in MOUNTABLE_TICKET
mkdir -p /mnt/work
printf '%s\n' "$MOUNTABLE_TICKET" | mountable mount --ticket-stdin --json /mnt/work &
# wait for {"event":"mounted",…}, use /mnt/work, then:
mountable unmount /mnt/work

Any existing, writable directory works as the mount point; mount checks it before it uses the ticket. The ticket is read from stdin, so it never appears in an argument list.

macOS

On macOS 26 (Apple Silicon) there is nothing else to install: no macFUSE, no kernel extension and no sudo. The CLI serves your filesystem to macOS's own NFS client, so it works like any other folder:

FS_ID=$(mountable fs list --json | jq -r '.[0].id')   # or the ID from `mountable fs list`
mkdir -p ~/mnt/work
mountable mount "$FS_ID" ~/mnt/work                   # add --ro for read-only

mountable mount stays running while the folder is mounted; use the folder from another terminal or any app, and stop with Ctrl-C or mountable unmount ~/mnt/work.

Your mount is private to your account: the CLI serves it over a socket only you can open and checks your user ID on every request. Revoking the session, or letting it expire, takes the mount away. Every write the Mac sends is saved by the service before macOS hears OK, so a crash of the CLI never loses a write macOS was told succeeded. Changes made on another Mac or a Linux machine show up here in under a second, and the other way round.

Limits

• Writes are write-through, at about 7 MiB/s; each write macOS sends, up to 1 MiB, uses one unit of the filesystem's metadata rate.
• Databases, logs and files patched in place work in the mount. SQLite works in its default rollback-journal mode (WAL falls back to it on the mount), integrity_check clean, and a 10,500-page-write run stayed clean. Each transaction creates and deletes its journal file, which counts toward the metadata rate, so expect up to a few hundred transactions a minute. git: 100 commits, git fsck clean. A file the service stores in more than about 8,000 pieces, such as a log appended and fsynced record by record or a file rewritten in small patches, keeps taking writes past the 9,999-piece limit: each write there also merges earlier pieces into one. Checked with 10,500 appends and 10,500 in-place rewrites, every byte read back.
• Merging is best effort. It pauses while the filesystem is above 80% of its storage quota, after one mount has merged a tenth of the quota in a day, or when the service is too slow to answer in time; a file that then reaches 9,999 pieces fails with "file too large". Merged data counts toward storage, downloads and spending caps like any other data.
• Near that limit a file writes more slowly: small patches went from about 330 writes a minute to about 75. A file written start to end runs at about a third of the usual speed past about 7.8 GiB, and reaches about 15 GiB in a day at the default quota, about 19.5 GiB at most.
• A failed write is reported once per file, to the first write, fsync or close of it by any program: if another program, such as a Finder preview, closes the file first, your fsync returns success for data that was not stored. Open the file with O_SYNC to get each write's error.
• Writes through mmap can fail without an error.
• Other mounts are coordinated per write, not for the whole time a file is open.
• Finish writing (close or fsync your files) before you unmount: a forced unmount of a busy mount, a revoked or expired session, or a crash of the CLI drops writes macOS has not sent yet, and an fsync running at that moment can still return success.
• macOS creates ._ files beside most files; to keep them out of git, run mkdir -p ~/.config/git && echo '._*' >> ~/.config/git/ignore (or append ._* to the file git config --global core.excludesFile names, if set).
• No Spotlight indexing, and locks (flock, fcntl) are local to the mount: open a database through one mount at a time, even on the same machine.

Skill

A skill teaches coding agents this workflow, the error codes and the retry rules:

npx skills add writeitai/mountable

It lives in skills/mountable/SKILL.md.

MCP server

mountable mcp serves the tools list_organizations, list_filesystems, create_filesystem, filesystem_usage, create_mount_ticket, list_mount_sessions, revoke_mount_session, list_webhooks, delete_webhook and enable_webhook over stdio (create_mount_ticket takes an optional max_duration_seconds). It authenticates like the CLI. Results are the API's JSON; errors return the code and hint. Mounting stays a process in the sandbox: create_mount_ticket returns the ticket and the command that mounts with it. Creating a webhook and rotating its secret are not tools: their result is the signing secret, which belongs in the backend that receives the deliveries, not in a model's context. Run mountable webhooks create there, or use the SDKs.

Give the server MOUNTABLE_API_KEY through its environment: inherited from the environment the MCP client starts in, or set in the client's MCP configuration under env. Never pass the key as a command-line argument, where it would end up in process listings and shell history.

Root mcp.json is the public manifest Cursor Directory reads. It pins the verified CLI and uses the placeholder REPLACE_WITH_YOUR_KEY. Replace that placeholder in your private editor config. Do not commit a real key. .cursor-plugin/plugin.json supplies the directory listing name mountable.io and the guide URL.

Claude Code (.mcp.json in the project; ${MOUNTABLE_API_KEY} is taken from the environment Claude Code runs in, so the key stays out of the file):

{
  "mcpServers": {
    "mountable": {
      "command": "npx",
      "args": ["-y", "mountable-cli", "mcp"],
      "env": { "MOUNTABLE_API_KEY": "${MOUNTABLE_API_KEY}" }
    }
  }
}

Claude Desktop (claude_desktop_config.json) and Cursor (~/.cursor/mcp.json); keep these files private, since they hold the key:

{
  "mcpServers": {
    "mountable": {
      "command": "npx",
      "args": ["-y", "mountable-cli", "mcp"],
      "env": { "MOUNTABLE_API_KEY": "mtbl_…" }
    }
  }
}

SDKs

Backends that read and write files without mounting use the files API through the SDKs, which create and refresh their own short token sessions from an API key. In a webhook receiver, verify_webhook / verifyWebhook checks a delivery's signature and returns its message.

Both are published as mountable-sdk, Python 3.10+ on PyPI and TypeScript on npm (Node 18+, Bun, or Deno):

pip install mountable-sdk      # import mountable_sdk
npm install mountable-sdk      # import { Mountable } from "mountable-sdk"

from mountable_sdk import Mountable

fs = Mountable().filesystem("fs_…", mode="rw")   # MOUNTABLE_API_KEY
info = fs.write("notes/a.md", "hello")
fs.write("notes/a.md", "hello again", if_match=info.etag)
print(fs.read("notes/a.md").data)

They live in sdk/python and sdk/typescript, behave the same way (the shared cases are in sdk/contract.md), and will be released together on tags sdk-vX.Y.Z.

LLM provider starters

examples/llm-providers has stdlib-only tools for the OpenAI Agents SDK and Responses API, Anthropic Messages API and Claude Code, Gemini ADK, and xAI Grok. The orchestrator holds MOUNTABLE_API_KEY and the sandbox receives the one-time ticket on stdin. The guide is https://mountable.io/docs/integrations.

Framework and memory examples

examples/llamaindex-snapshot saves a small LlamaIndex index as checked JSON files and loads it in a fresh process. Follow the snapshot guide.

examples/haystack-pipeline saves a small Haystack pipeline as YAML, verifies it in a fresh process and loads it with Haystack's default protections, without a model call. mountable.io maintains it separately from Haystack. Guide.

examples/external-integrations has Pydantic AI tools for persistent Markdown notes and a paginated Mem0 record export. Both use the Files API through the SDK. Their offline tests exercise the real frameworks and SDKs without paid cloud or model calls.

examples/langgraph-workspace has a LangGraph write node and a read node on one mountable.io filesystem. A later process reads the same note with a new in-memory checkpoint. examples/langgraph-js-workspace is the same handoff in LangGraph.js. The guide is https://mountable.io/docs/langgraph.

examples/crewai-workspace has a CrewAI writer and reader on one mountable.io filesystem. The writer answers stored, and the reader reads the file. A later process reads the same note. The guide is https://mountable.io/docs/crewai.

examples/smolagents-workspace has two smolagents tools on one mountable.io filesystem. write_note stores a note and read_note reads it from a later process. The example calls the framework's tool interface and does not call a model. The guide is https://mountable.io/docs/smolagents.

examples/semantic-kernel-workspace calls two native functions through Kernel.invoke, then reads the note in a fresh process without a model call. mountable.io maintains it separately from Microsoft. Guide.

examples/strands-workspace binds two Strands @tool functions to a backend-chosen filesystem and path, invokes them through the validated tool-use stream, and reads the note in a fresh process without a model call. mountable.io maintains it separately from AWS and the Strands project. Guide.

examples/deno-note saves one note with the released mountable-sdk package inside Deno 2.9.8, then reads it from a fresh process. The script asks only for the API key, filesystem id, note path and mountable.io. mountable.io maintains it separately from Deno. It is a local Deno script, not Deno Deploy. Guide.

examples/playwright-artifacts saves a screenshot and a Playwright trace of a local fixture, uploads the closed files with the TypeScript SDK, and has a later process check the same bytes. The guide is https://mountable.io/docs/playwright.

examples/slack-file-webhook checks a signed files.changed webhook and posts the path to a Slack incoming webhook. The guide is https://mountable.io/docs/slack-file-webhook.

examples/git-and-output keeps a source change in local Git history and hands its generated report to a fresh read-only worker through the SDK. Its offline tests need no credentials.

examples/two-editors has two processes edit one task file. The second write sends the ETag both of them read, so it is refused and the first edit stays. The second process reads again and sets only its own field. Its offline tests need no credentials. The guide is https://mountable.io/docs/stale-edit.

examples/job-cleanup records the files one job created and deletes a file only when its path and ETag still match. A second job's prefix stays. Its offline tests need no credentials. The guide is https://mountable.io/docs/job-cleanup.

examples/fastapi-reports generates a small report in a FastAPI process, uploads it, and returns it from a second process. The caller receives an id only after the upload succeeds. The guide is https://mountable.io/docs/fastapi.

examples/prefect-task-report runs a Prefect flow that uploads a closed report and returns an id. A second process runs a reader flow and checks the same bytes. The guide is https://mountable.io/docs/prefect.

examples/dagster-materialization materializes a tiny local Dagster asset, uploads the closed JSON report, and has a fresh process check the run id, asset key, row count and checksums. The guide is https://mountable.io/docs/dagster.

examples/airflow-task-report runs an Airflow TaskFlow DAG that uploads a closed report and passes only an id through XCom. A fresh process checks the same bytes. The guide is https://mountable.io/docs/airflow.

examples/huggingface-datasets saves a two-row Hugging Face dataset with save_to_disk, uploads that closed file set, and has a fresh process check the hashes before load_from_disk. The guide is https://mountable.io/docs/huggingface-datasets.

examples/csv-parquet-batches commits small CSV-to-Parquet batches one at a time through the SDK. A manifest records a batch only after its upload reads back with the right checksum, so a fresh process resumes without redoing or duplicating a batch. Its offline tests need no credentials.

examples/dspy-evaluation saves a tiny model-free DSPy evaluation as checked JSON files. A fresh process verifies the bundle and recomputes the same fixture score. Follow the DSPy guide.

Showcase demos

examples/showcase runs two demos: a planner sandbox and a coder sandbox sharing one directory, then a read-only laptop mount; and a revocation kill switch. python3 examples/showcase/relay.py --dry-run prints the sequence without calling the API. The same illustrations play at https://mountable.io/showcase and do not create a filesystem.

Notebook starters

examples/notebooks has a Jupyter notebook for Colab, Kaggle, Deepnote and Hugging Face Spaces and a Marimo notebook. They keep datasets, feature caches and checkpoints in a mountable.io folder with mountable-sdk, so the files stay when the kernel restarts.

Multi-agent coding harness

examples/research-showcases/multi-agent-harness runs a planner, coder and verifier on one shared folder. A signed file-change webhook triggers a read-only verifier mount. Run harness.py offline by default, or use --live to create a filesystem with a monthly spend cap and rate limit.

Licenses

mountable licenses prints the licenses and notices of the third-party code compiled into the CLI, which also ship as THIRD_PARTY_NOTICES with every package and release archive.

Documentation: https://mountable.io/docs.

Development

go test ./...
go run ./tools/notices > THIRD_PARTY_NOTICES   # after changing dependencies
packaging/build.sh 0.0.0    # binaries, release archives, npm tarball and wheel in dist/

# SDKs
(cd sdk/python && uv run ruff format --check . && uv run ruff check . && uv run pyright && uv run pytest)
(cd sdk/typescript && npm ci && npm run typecheck && npm test && npm run build)

Releases are cut by pushing a tag vX.Y.Z (CLI) or sdk-vX.Y.Z (SDKs); see packaging/README.md. The mountable.io service itself is operated by WriteIt.ai s.r.o.; this repository contains the open-source client only.

License

Apache-2.0.