AI Decision System
Replayable, offline-verifiable records for AI-assisted go/no-go decisions: experiment promotions, typed model answers and human-approved actions.
PiLyzer는 Pico 2용 3채널 오실로스코프·스펙트럼·로직 분석기로, WebUSB로 바로 연결하거나 내장 데모를 탐색할 수 있다
PiLyzer — a three-channel oscilloscope, spectrum and logic analyser for Pico 2. Connect directly with WebUSB or explore the built-in demo.
개발 도구Swift · JavaScriptGitHub @Satachito온라인운영자 미확인
써 보셨어요? 한 번만 눌러 주세요. 로그인은 필요 없어요.
PiLyzer and ArLyzer: an oscilloscope, spectrum analyser and logic analyser on a Raspberry Pi Pico 2 or an Arduino Nano R4 / UNO R4 Minima / UNO R4 WiFi. Firmware, a macOS app, a browser app (WebUSB, Web Serial or over Wi-Fi) and KiCad front ends.
저장소 README에서 가져옴
README 전체를 불러오는 중입니다. 아래는 저장된 발췌입니다.
Oscilloscope projects: one instrument — oscilloscope, spectrum analyser, logic
analyser and meter — on a Raspberry Pi Pico 2 (PiLyzer) or an Arduino R4
(ArLyzer), and the applications that drive both.
Open PiLyzer Web ·
Download macOS releases ·
Watch the introduction (6 min, Japanese with English subtitles)
The build log, in English with Japanese subtitles: PiLyzer #1 ·
PiLyzer #2 · ArLyzer on three Arduino R4 boardsREADME 전문 보기 ↗Oscilloscope projects: one instrument — oscilloscope, spectrum analyser, logic analyser and meter — on a Raspberry Pi Pico 2 (PiLyzer) or an Arduino R4 (ArLyzer), and the applications that drive both.
| Project | Hardware | Applications |
|---|---|---|
| Pico2 | Raspberry Pi Pico 2, bare or behind a front end — the PiLyzer AFE, a one-op-amp mini AFE, or a picoLABO PL2407AFE; an original Pico too, bare or on the PL2407AFE | macOS · WebUSB |
| ArLyzer | Arduino Nano R4, UNO R4 Minima or UNO R4 WiFi — the same protocol as the Pico 2, up to eight analogue inputs and logic on D2–D9; the UNO R4 WiFi also over Wi-Fi | the same macOS · Web applications |
| PCBScope | PCBScope / DPScope SE | Native macOS HID application restored from the original project |
Open PiLyzer Web · Download macOS releases · Watch the introduction (6 min, Japanese with English subtitles)
The build log, in English with Japanese subtitles: PiLyzer #1 · PiLyzer #2 · ArLyzer on three Arduino R4 boards
PiLyzer's firmware, KiCad schematics, documentation and native app now live
under Pico2/; ArLyzer's sketch and the UNO R4 WiFi's Wi-Fi bridge under
ArLyzer/. The Git repository remains at this level. Each native app is
an independent Swift package; run its build commands from its own directory.
(cd Pico2 && ./Scripts/make-app.sh)
(cd PCBScope && ./Scripts/make-app.sh)
PiLyzer Web talks directly to the instrument in Chrome or Edge on a desktop
computer — macOS, Windows and Linux alike, with nothing to install on any of
them: WebUSB for a Pico 2 (firmware 1.6 and later), Web Serial for an ArLyzer.
A Pico 2 W or an UNO R4 WiFi serves it itself over Wi-Fi, at
http://pilyzer.local or http://arlyzer.local, so a phone or a tablet needs
no USB at all. Demo mode also works without an instrument: Try demo in
PiLyzer Web, and from 3.3.10 Start a demo in the middle of the Mac app's
empty screen, each one click.
Captured samples remain in the browser; CSV export saves them locally.
From 3.3.6, the copy on GitHub Pages counts page views, and which way an
instrument was connected (USB, serial or the demo), with Google Analytics. The
copy a board serves, and one run locally, load nothing of the kind, and no
samples, readings or device details are sent.