HyperCache: Host-Local Storage & Memory Acceleration for AI Workloads

Looking for operator cluster setup instructions? See the Getting Started Guide for a step-by-step walkthrough.
Looking for deep systems internals? See the Architecture Whitepaper for block layout, DMA mechanics, and subsystem design.

---

Table of Contents

1. What is HyperCache?
2. The Problem: Why AI Infrastructure Hits an I/O Wall
3. Theoretical Hardware Bandwidth: Local Bus vs. Network Storage
4. What Can You Use HyperCache For?
5. Hardware & System Requirements
6. How to Build & Install HyperCache
7. Configuration Guide (hypercache-agent.toml & hypercache-controller.toml)
8. How to Use HyperCache (Single-Node & Multi-Node Cluster)
9. URI Addressing & Backend Routing
10. Python & PyTorch Integration Examples
11. Fleet & Node Architecture
12. Security, Network Ports & Authentication Model
13. Host RAM Footprint & Sizing Calculator
14. Prometheus & Grafana Monitoring Stack
15. Complete CLI Reference
16. Running Tests & Verification Suites
17. License

---

What is HyperCache?

HyperCache is an open-source, host-local caching and I/O acceleration engine purpose-built for AI training and inference infrastructure. Written in Rust (control plane and cluster coordinator) and Python (zero-copy data plane and framework integrations), it runs directly on your compute nodes between remote storage (Amazon S3, S3-compatible object stores, or NFS) and your AI frameworks (PyTorch, Safetensors, Hugging Face, vLLM).

Instead of pulling multi-gigabyte model weights, training checkpoints, and tokenized datasets across the network every time a job starts, a container scales up, or a training step saves state, HyperCache pools each node's local NVMe SSDs into an autonomous, striped high-speed cache pool (with an optional Host RAM tier for specialized in-memory workloads).

When an AI workload reads a model or writes a checkpoint using a hypercache:// URI:

1. Sub-Millisecond Local Resolution (< 1 ms): Your Python process queries the local HyperCache daemon over a Unix Domain Socket. The daemon resolves the exact 4 MiB chunk locations in under a millisecond using an embedded in-memory cache - with zero external databases (no Redis, etcd, PostgreSQL, or JVM required).
2. Direct Hardware Streaming: Your Python process streams chunks directly from striped local NVMe drives (O_DIRECT Direct Block DMA and NVIDIA GPUDirect Storage / kvikio.CuFile) straight into GPU VRAM or host memory - bypassing the network stack, the Linux kernel page cache, and redundant CPU memory copies.

+===================================================================================================+
|                        AI WORKLOAD (PyTorch / vLLM / Safetensors / FSDP)                          |
|                    torch.load("hypercache://s3/models/llama-3-70b/weights.pt")                    |
+=================================================+=================================================+
                                                  |
                  1. Locate Chunks (< 1 ms UDS)   |   2. Zero-Copy Direct Block DMA / GDS
                     +----------------------------+----------------------------+
                     |                                                         |
                     v                                                         v
+=========================================+               +=========================================+
|     HYPERCACHE LOCAL DAEMON (Rust)      |               |       LOCAL HARDWARE DATA PLANE         |
|                                         |               |                                         |
| - In-Memory Metadata (Moka W-TinyLFU)   |               | [ Striped Local NVMe Pool (Primary) ]   |
| - Instant Warm-Boot Manifest (< 20 ms)  |               |   -> Up to 7 GB/s per PCIe Gen 4 NVMe   |
| - Auto Drive Discovery & Root Safety    |               |   -> Up to 14 GB/s per PCIe Gen 5 NVMe  |
| - Background Async S3 / NFS Sync        |               |                                         |
| - Peer-to-Peer (P2P) Chunk Exchange     |               | [ Optional: Host RAM (/dev/shm) Tier ]  |
+====================+====================+               |   -> 50 - 100+ GB/s DDR5 / CXL Stream   |
                     |                                    +=========================================+
                     | 3. Cache Miss Ingest / Async Write-Back Flush
                     v
+===================================================================================================+
|                  AUTHORITATIVE REMOTE STORAGE (Amazon S3 / R2 / MinIO / Ceph / NFS)               |
+===================================================================================================+

---

The Problem: Why AI Infrastructure Hits an I/O Wall

Modern GPUs (NVIDIA H100, H200, B200) can execute terabytes of tensor math per second, but feeding data to those GPUs from remote storage creates four major infrastructure bottlenecks:

1. Slow Cold Starts & Auto-Scaling Delays: When an inference server scales up to handle a traffic spike or a serverless GPU worker spins up, pulling a 70 GB to 140 GB model from S3 or NFS over a congested network typically takes 5 to 15+ minutes. Expensive GPUs sit completely idle waiting for weights to download before serving a single token.
2. Multi-Node "Checkpoint Storms": In distributed training or fleet rollouts, all 32, 64, or 128 GPU nodes request the exact same checkpoint from central storage at the exact same second ($64 \text{ nodes} \times 70 \text{ GB} = 4.48 \text{ TB}$ of simultaneous network traffic). This saturates Top-of-Rack (ToR) switches, hits S3 rate limits, and steals network bandwidth needed for GPU-to-GPU gradient synchronization (NCCL AllReduce over RoCE/InfiniBand).
3. Training Stalls During torch.save(): Saving multi-gigabyte checkpoints synchronously to remote object storage pauses the entire GPU training cluster at the end of every epoch or checkpoint interval.
4. Physical Network Card (NIC) & OS Kernel Bottlenecks: No matter how fast a central storage cluster is, a compute node cannot ingest data over the network faster than its physical NIC - and standard POSIX file reads copy gigabytes through the Linux kernel VFS and page cache before ever reaching the GPU.

---

Theoretical Hardware Bandwidth: Local Bus vs. Network Storage

By shifting data delivery from the network fabric to local PCIe lanes and host memory channels, HyperCache unlocks the physical bandwidth already sitting inside every GPU server:

$$\text{Theoretical Max NIC Throughput (GB/s)} = \frac{\text{NIC Bandwidth (Gbps)}}{8}$$

Data Path / Hardware Tier	Per-Device / Per-Link Theoretical Limit	Multi-Drive / Multi-Channel Node Throughput	Network Traffic Generated
Shared Storage over 200GbE / 400GbE (Single Node Idle Fabric)	25 - 50 GB/s wire limit	~15 - 35 GB/s (uncontended)	100% over fabric switches
Shared Storage over 200GbE / 400GbE (32+ Nodes Concurrent Load)	Shared origin ceiling	~1.5 - 4.0 GB/s per node (divided across hosts & contends with NCCL)	100% over fabric switches
HyperCache Tier 2: PCIe Gen 4 NVMe	~7.0 GB/s per NVMe SSD	~28 GB/s (4x NVMe) / ~56 GB/s (8x NVMe)	0 Bytes (100% Local PCIe)
HyperCache Tier 2: PCIe Gen 5 NVMe	~14.0 GB/s per NVMe SSD	~56 GB/s (4x NVMe) / ~112 GB/s (8x NVMe)	0 Bytes (100% Local PCIe)
HyperCache Tier 1: Host RAM (DDR5 / CXL)	50 - 100+ GB/s per stream	300 - 460+ GB/s (8-12 channel DDR5 bus)	0 Bytes (100% Memory Bus)

Because each node reads autonomously from its own local RAM and NVMe drives, cluster-wide read bandwidth scales linearly with the number of nodes - with zero central storage ceiling and zero interference with inter-GPU training traffic.

---

What Can You Use HyperCache For?

HyperCache is designed for both AI Inference and Distributed AI Training, from a single GPU machine to multi-node clusters:

1. Fast LLM Inference Cold Starts & Serverless GPU Scaling

• Pre-Warm Models Fleet-Wide: Use ./hypercache-admin preload to stage base models onto local NVMe or RAM across your cluster ahead of traffic spikes.
• Layer-by-Layer Pipelined Loading (HyperCachePipelinedLoader): Instead of waiting for 100% of a model to load before starting inference, HyperCache loads Layer 0 in milliseconds so GPU forward-pass compute starts immediately while background DMA threads prefetch Layers $1, 2, \dots, N$ ahead of execution.
• Zero-Copy Multi-Tenant Model Sharing (MAP_SHARED): If you run multiple inference worker processes or containers on the same machine, they map the exact same physical RAM pages in Tier 1 shared memory with 0 bytes of memory duplication.

2. Sub-Millisecond Multi-LoRA Adapter Hot-Swapping

• Multi-tenant serving platforms often run one base model alongside hundreds of fine-tuned customer LoRA adapters (20 MB to 200 MB each).
• By pinning active LoRA adapters in Tier 1 Host RAM (/dev/shm or HugePages), HyperCache swaps adapters at memory-bus speed in under 1 millisecond with zero network roundtrips.

3. Non-Blocking Training Checkpoints (torch.save & PyTorch FSDP / DCP)

• Asynchronous Write-Back Caching: When your training script calls torch.save() (or HyperCacheDCPStorageWriter for multi-rank FSDP), HyperCache stages the checkpoint to local RAM or striped NVMe at hardware line rate and unblocks PyTorch immediately so training continues without stalling. A background worker asynchronously uploads the checkpoint to S3 or NFS.
• $k=2$ Peer Checkpoint Replication: To protect against spot instance preemptions or node crashes before the background S3 upload finishes, HyperCache can replicate staged checkpoint chunks to a peer node in the cluster before unblocking the training loop (peer_replication_factor = 2).
• Synchronous Write-Through Mode: When strict remote durability is required (e.g., final epoch checkpoints), pass write_through=True to wait for remote S3/NFS confirmation before returning.

4. Sharded Dataset Caching for Distributed PyTorch DataLoaders

• For multi-node training, the Central Controller partitions tokenized dataset shards across worker nodes using Rendezvous (Consistent) Hashing (./hypercache-admin preload-batch --prefix s3://bucket/shards/ --sharded).
• Each node caches only its assigned $1/N$ slice of the dataset and streams batches into local PyTorch DataLoader workers at local NVMe line rate with zero network traffic. Because it uses consistent hashing, adding or removing a node only remaps $1/N$ of the shards instead of invalidating the entire cluster cache.

5. LLM KV-Cache Prefix Block Offloading (HyperCacheKVStore)

• Long-context LLM serving generates massive KV-cache tensors. Rather than recomputing shared prompt prefixes when GPU VRAM fills up, inference engines (and frameworks like LMCache or Dynamo KVBM) can use HyperCacheKVStore to offload content-addressed KV-cache blocks into Tier 1 Host RAM with automatic spillover to Tier 2 NVMe.

6. Peer-to-Peer (P2P) Fleet Distribution

• When preloading a large model across a multi-node cluster, you do not want every node pulling the full file from S3 simultaneously.
• With p2p_preload_enabled = true, each node pulls only $1/N$ of the model's 4 MiB chunks from S3 and exchanges the remaining chunks directly with peer nodes over the internal cluster network - cutting S3 egress cost and origin load by $N\times$.

---

Hardware & System Requirements

1. Storage Drives: Raw Unformatted Block Devices (NVMe Recommended, SATA SSD Supported)

• Raw Drives Without a Filesystem: For HyperCache's native Raw Block Striping mode (storage_backing_mode = "raw_block" or "auto") to claim and stripe across local drives, the target drives must be raw, unmounted block devices with no existing filesystem on them.
  • HyperCache automatically inspects sector headers for existing filesystem superblocks (ext4, XFS, Btrfs, ZFS, and Linux swap). Any drive containing an existing filesystem or mounted partition is automatically skipped by the safety guard to prevent accidental data loss.
  • To prepare a previously formatted drive for raw block striping, unmount it and wipe its filesystem signature:

    sudo wipefs -a /dev/nvme1n1
    

• NVMe SSDs vs. SATA SSDs:
  • PCIe Gen 4 / Gen 5 NVMe SSDs (Recommended): HyperCache is architected for multi-queue PCIe NVMe drives (/dev/nvme*), delivering up to ~7 GB/s per PCIe Gen 4 NVMe and ~14 GB/s per PCIe Gen 5 NVMe when striped across local drives.
  • SATA SSDs (Supported at Lower Speeds): HyperCache can also discover and stripe across standard SATA SSDs (/dev/sd*). However, because SATA III is physically limited to a 6 Gbps interface (~500-550 MB/s per drive), SATA SSDs will not achieve NVMe-class throughput.

---

2. Recommended Node Chassis (x86_64)

HyperCache is hardware-vendor agnostic and works on any x86_64 Linux system with available NVMe drives - including custom builds, GPU workstations, OEM servers, and cloud instances.

For 8-GPU data center deployments, below are recommended enterprise node chassis equipped with high-density local NVMe bays (8x to 16x E1.S/L, E3.S/L, U.2, or M.2 drives):

Server Vendor	System Model	GPU Platform	Host CPU Architecture
Supermicro (SMC)	SYS-821GE-TNHR	NVIDIA HGX H100 / H200 (8-GPU)	Dual Intel Xeon (x86_64)
Supermicro (SMC)	AS-8125GS-TNMR2	NVIDIA HGX H100 / H200 (8-GPU)	Dual AMD EPYC (x86_64)
Supermicro (SMC)	SYS-A22GA-NBRT	NVIDIA HGX B200 / B300 (8-GPU)	Dual Intel Xeon (x86_64)
Supermicro (SMC)	AS-A126GS-TNBR	NVIDIA HGX B200 / B300 (8-GPU)	Dual AMD EPYC (x86_64)
Dell PowerEdge	PowerEdge XE9680	NVIDIA HGX H100 / H200 (8-GPU)	Dual Intel Xeon (x86_64)
Dell PowerEdge	PowerEdge XE9780	NVIDIA HGX B200 / B300 (8-GPU)	Dual Intel Xeon (x86_64)
Dell PowerEdge	PowerEdge XE9785	NVIDIA HGX B200 / B300 (8-GPU)	Dual AMD EPYC (x86_64)

Note: The systems listed above are representative examples, not an exclusive compatibility list. Any custom build, OEM server (ASUS, Gigabyte, Lenovo, HPE), or cloud GPU instance with attached local NVMe/SSD storage is supported.

---

3. CPU Architecture Support (x86_64 Tested vs. ARM64 Pending)

• x86_64 (Intel Xeon & AMD EPYC) - Tested & Supported: HyperCache has been tested and validated on x86_64 Linux servers and cloud instances.
• ARM64 (aarch64 / NVIDIA Grace) - Untested / Pending Validation: HyperCache has not yet been tested on ARM systems. Specifically, NVIDIA GB200 / GB300 / NVL72 and Vera Rubin rack-scale architectures still require hardware testing and validation.

---

4. Operating System & Software Prerequisites

• Operating System: Linux (x86_64, Kernel 5.15+ recommended for optimal O_DIRECT, HugePages, and NUMA sysfs discovery).
• Permissions: Root privileges (sudo) or CAP_SYS_RAWIO + disk group read/write access on target /dev/nvme* block devices (verify anytime with ./hypercache check).
• Build & Runtime Toolchains: Rust 1.75+ (cargo) and Python 3.9+ (pip, venv), both installed automatically if you run ./install.sh.

---

How to Build & Install HyperCache

HyperCache compiles into two native, zero-dependency Rust executables (./hypercache and ./hypercache-admin) plus a lightweight Python package (client-py).

Option A: Automated One-Step Install (install.sh)

The repository includes an automated bootstrapper that installs system build tools, clones the repository (if run standalone), installs the Rust toolchain (cargo), sets up a Python virtual environment (.venv) with the hypercache Python client and optional NVIDIA GPUDirect Storage (kvikio) bindings, and compiles the release binaries:

# One-liner bootstrap install:
curl -fsSL https://hypercache.sh/install.sh | bash

# Or clone and run locally:
git clone https://github.com/looelabs/hypercache.git
cd hypercache
./install.sh

Option B: Manual Build (./build.sh + pip)

If you already have Rust (1.75+) and Python (3.9+) installed:

1. Compile the Native Rust Binaries

# Compiles release binaries and copies ./hypercache and ./hypercache-admin to the repo root
./build.sh

# Or build directly with Cargo:
cargo build --release --manifest-path control-plane/Cargo.toml
cp control-plane/target/release/hypercache ./hypercache
cp control-plane/target/release/hypercache-admin ./hypercache-admin

• ./hypercache (Worker Node Daemon & Local CLI): Runs on each GPU/CPU compute node to manage local RAM and NVMe pools, serve local Python processes over Unix Domain Sockets, run host readiness checks, and export Prometheus metrics.
• ./hypercache-admin (Cluster Controller & Fleet CLI): Runs on the Controller host (or operator terminal) to track cluster topology and dispatch fleet-wide preload, dataset sharding, eviction, and purge commands.

2. Install the Python Data Plane & Integrations (hypercache-io)

# Install from PyPI (imports as `import hypercache` in Python)
pip install hypercache-io

# Or install from the local repo into your active Python environment
pip install -e ./client-py

# Optional: On NVIDIA GPU nodes, install GPUDirect Storage (cuFile / KvikIO) support
pip install "hypercache-io[gpu]" --extra-index-url https://pypi.nvidia.com

Option C: Pre-Built Release Binaries, Docker & Kubernetes

If you only want the pre-compiled Linux binaries + the PyPI Python library (or are deploying on Kubernetes):

# 1. Download pre-built Linux x86_64 binaries (hypercache & hypercache-admin)
curl -fsSL https://github.com/looelabs/hypercache/releases/latest/download/hypercache-linux-x86_64.tar.gz | tar -xz

# 2. Install the Python library into your PyTorch / vLLM environment from PyPI
pip install hypercache-io

# 3. Or deploy the Controller + GPU Worker DaemonSet on Kubernetes
kubectl apply -f deploy/kubernetes/hypercache.yaml

Running the daemon in Docker and using it from the host

Clients do not stream data through the daemon. They get a chunk layout over the socket, then read and write the cache files directly at the paths the daemon reports. A containerized daemon is therefore usable from the host (or from other containers) only when:

1. Every cache path is bind-mounted at the same path on both sides: the socket directory, the arena directory and, with the RAM tier, the shared-memory directory. A container's own /dev/shm is private, so mount a host directory there.
2. Non-root clients are in client_gid. The daemon runs as root and gives this numeric group read/write access to the socket, arenas and RAM-tier files. Without it, only root can connect.

# configs/my-agent.toml: storage_backing_mode = "filesystem",
#   filesystem_cache_paths = ["/var/cache/hypercache"], client_gid = 2000
#   (optional RAM tier: ram_cache_enabled = true, ram_cache_shm_path = "/dev/shm/hypercache")
sudo mkdir -p /run/hypercache /var/cache/hypercache /var/lib/hypercache /dev/shm/hypercache
docker run -d --name hypercache \
  -v /run/hypercache:/run/hypercache \
  -v /var/cache/hypercache:/var/cache/hypercache \
  -v /var/lib/hypercache:/var/lib/hypercache \
  -v /dev/shm/hypercache:/dev/shm/hypercache \
  -v /mnt/nfs:/mnt/nfs:ro \
  -v "$PWD/configs/my-agent.toml:/etc/hypercache/agent.toml:ro" \
  ghcr.io/looelabs/hypercache:latest -c /etc/hypercache/agent.toml start

# On the host, as a user in group 2000:
python -c "from hypercache.client import HyperCacheClient; print(HyperCacheClient().ping())"

docker stop shuts the daemon down cleanly (SIGTERM flushes the manifest and removes the socket). scripts/e2e/container_host_access.sh tests exactly this layout.

Arena sizing: space is reserved at startup

Filesystem arenas are preallocated (fallocate) when the daemon starts, so an arena that does not fit fails immediately with the numbers, for example arena "/var/cache/hypercache/hypercache_arena.dat" needs 107374182400 more bytes (100.00 GiB) but only 39728455680 (37.00 GiB) are free, and the daemon (or the pod) refuses to start. Before, arenas were sparse and a full disk only showed up later as failed ingests. hypercache check reports the same condition without creating anything. Set filesystem_arena_preallocate = false to keep sparse (thin-provisioned) arenas on purpose. Existing sparse arenas are filled in place on the next start; their data is untouched.

Raw-block mode with non-root clients

In raw_block mode clients open the NVMe device nodes directly, so they need read/write access to them, not just to the socket:

1. Set client_gid. At every start the daemon gives that group read/write (0660) on the devices it claims (only those: the OS disk and mounted disks are never touched). In a privileged container with the host's /dev mounted, this changes the host's device node.
2. Make it survive reboots and device rescans (udev resets device permissions) with a udev rule on the host, e.g. /etc/udev/rules.d/99-hypercache.rules:

   KERNEL=="nvme1n1", GROUP="2000", MODE="0660"
   KERNEL=="nvme2n1", GROUP="2000", MODE="0660"
   

   then sudo udevadm control --reload && sudo udevadm trigger.
3. Containers / Kubernetes: the daemon container must be privileged with the host's /dev (see the DaemonSet comments). Client containers need the device itself: --device /dev/nvme1n1 in Docker; in Kubernetes the runtime's device policy blocks block devices for unprivileged pods even when the file mode allows them, so client pods must be privileged or get the device through a device plugin. For unprivileged training pods, use storage_backing_mode = "filesystem".

Security note: members of client_gid can read and write the whole raw devices, including every cached object, which the zero-copy read path requires. Only add trusted training users.

scripts/e2e/bare_metal_access.sh (bare-metal Linux), container_host_access.sh (Docker) and k8s_smoke.sh (minikube) test these setups on loop devices.

---

Configuration Guide (hypercache-agent.toml & hypercache-controller.toml)

All HyperCache configuration files live in the configs/ directory and use strongly-typed TOML syntax. Passing -c <path> to ./hypercache or ./hypercache-admin loads the specified configuration file.

Which Config File Should I Use?

Configuration File	Where It Runs	Binary Used	Purpose
configs/hypercache-agent.toml	Every GPU / CPU Worker Node	./hypercache	Configures local NVMe discovery (raw block drives or filesystem arenas), authoritative S3/NFS credentials, write-back/write-through behavior, and optional registration with a Central Controller.
configs/hypercache-controller.toml	Central Controller / Head Node (Multi-node clusters only)	./hypercache-admin	Configures the cluster coordinator bind IP/port (9120), shared Bearer token authentication (cluster_auth_token), and Peer-to-Peer fleet distribution (p2p_preload_enabled). Not needed for single-node setups.

---

1. Choosing Your Storage Backing Mode (configs/hypercache-agent.toml)

HyperCache supports two ways to back your local NVMe cache pool depending on your environment:

A. Raw Block Device Mode (storage_backing_mode = "raw_block" or "auto")

Best for bare-metal GPU servers or Cloud VMs with dedicated, unmounted local NVMe drives (e.g., /dev/nvme1n1, /dev/nvme2n1). HyperCache automatically discovers unmounted drives, excludes your OS root disk (/), and stripes 4 MiB chunks directly across raw disk sectors with zero filesystem overhead.

storage_backing_mode = "auto"
device_discovery_mode = "auto" # Or set "manual" and block_devices = ["/dev/nvme1n1", "/dev/nvme2n1"]
exclude_root_device = true

B. Filesystem Direct I/O Arena Mode (storage_backing_mode = "filesystem")

Best for Kubernetes pods (emptyDir / local-storage PVCs), shared servers where drives are already mounted with ext4/XFS, or native NVIDIA GPUDirect Storage (cuFile). HyperCache pre-allocates aligned arena files inside the specified directories and opens them with O_DIRECT - requiring zero raw block privileges.

storage_backing_mode = "filesystem"
filesystem_cache_paths = ["/mnt/nvme0/hypercache", "/mnt/nvme1/hypercache"]
filesystem_arena_size_bytes = 107374182400 # 100 GiB arena capacity per directory

---

2. Worker Node Agent Configuration (configs/hypercache-agent.toml)

Below is a complete annotated example of configs/hypercache-agent.toml showing the settings you configure on a GPU worker node:

# ==============================================================================
# 1. STORAGE POOL & TIERING
# ==============================================================================
storage_backing_mode = "auto"              # "auto", "raw_block", or "filesystem"
device_discovery_mode = "auto"             # "auto" (scan /sys/class/block) or "manual"
include_partitions = true                  # Include unmounted partitions
device_prefixes = ["nvme", "sd"]
exclude_root_device = true                 # Always protect OS root disk (/)
chunk_size_bytes = 4194304                 # 4 MiB stripe chunk size
device_start_offset_bytes = 4096           # 4 KB alignment safety margin

# If using storage_backing_mode = "filesystem", specify mounted XFS/ext4 directories:
filesystem_cache_paths = []
filesystem_arena_size_bytes = 10737418240  # 10 GiB per arena file

# Tier 1 Host RAM / CXL Shared Memory Acceleration (/dev/shm or HugePages)
ram_cache_enabled = false                  # Set true (or pass --ram) for 50-100+ GB/s RAM tier
ram_cache_capacity_bytes = 34359738368     # 32 GiB (or auto-sizes to 75% of /dev/shm if omitted)
ram_cache_shm_path = "/dev/shm/hypercache"
ram_cache_hugepages = false                # Set true to back Tier 1 with /dev/hugepages
ram_cache_hugepages_path = "/dev/hugepages/hypercache"

# Dual-Tier Metadata Persistence (Async JSON + binary manifest for < 20 ms warm-boot recovery)
metadata_persistence_enabled = true
metadata_persistence_path = "/var/lib/hypercache/metadata.json"

# ==============================================================================
# 2. AUTHORITATIVE REMOTE STORAGE (S3 / NFS)
# ==============================================================================
authoritative_backend = "s3"               # Default backend: "s3" or "nfs"
s3_endpoint = "https://s3.us-east-1.amazonaws.com"
s3_region = "us-east-1"
s3_bucket = "model-weights-bucket"
s3_access_key = "YOUR_ACCESS_KEY"          # Or set via env: export AWS_ACCESS_KEY_ID="..."
s3_secret_key = "YOUR_SECRET_KEY"          # Or set via env: export AWS_SECRET_ACCESS_KEY="..."
allow_synthetic_s3_fallback = false        # Keep false in production so S3 errors fail fast
# s3_session_token = "$AWS_SESSION_TOKEN"  # STS / IRSA temporary credentials (env var used by default)
s3_parallel_streams = 8                    # Parallel ranged GETs per object during ingest
s3_multipart_threshold_bytes = 67108864    # Uploads above 64 MiB use S3 multipart (required above 5 GiB)

# Used when authoritative_backend = "nfs" or URI starts with file:// or nfs://
nfs_mount_path = "/mnt/nfs"
# file:// and nfs:// URIs are confined to nfs_mount_path plus these roots (symlink/.. escapes rejected)
# nfs_allowed_paths = ["/mnt/datasets"]

# Checkpoint Write Semantics & Fault Tolerance
write_through_enabled = false              # false = async Write-Back, true = sync Write-Through
peer_replication_factor = 1                # Set to 2 for k=2 peer replica before CommitWrite returns

# ==============================================================================
# 3. MULTI-NODE CLUSTER REGISTRATION (Optional - Omit for Single-Node Mode)
# ==============================================================================
node_id = "gpu-node-01"                    # Defaults to system hostname if omitted
# controller_url = "http://10.0.0.10:9120" # Uncomment to register with Central Controller
# cluster_auth_token = "your-cluster-token"# Or set via env: export HYPERCACHE_AUTH_TOKEN="..."

agent_enabled = false                      # Auto-enabled when controller_url is set (or pass --agent)
agent_bind_address = "0.0.0.0"             # Non-loopback binds REQUIRE cluster_auth_token (agent refuses otherwise)
agent_http_port = 9115

[node_labels]                              # Optional labels for --selector targeting
gpu = "h100"
pool = "training"

# ==============================================================================
# 4. PROMETHEUS TELEMETRY (Optional - Off by Default)
# ==============================================================================
metrics_enabled = false                    # Set true (or pass --metrics) to expose :9110/metrics
metrics_bind_address = "127.0.0.1"
metrics_port = 9110

---

3. Central Controller Configuration (configs/hypercache-controller.toml)

If you are running a multi-node GPU cluster, deploy configs/hypercache-controller.toml on your head/coordinator node:

# IP address and port to bind the Central Controller service on
controller_bind_address = "0.0.0.0"
controller_port = 9120

# Shared secret Bearer token for cluster security
# Worker nodes must provide this token to register, and remote CLI calls require it.
# Local CLI calls from 127.0.0.1 on the controller host bypass authentication automatically.
# Can also be set via: export HYPERCACHE_AUTH_TOKEN="your-cluster-token"
cluster_auth_token = "your-cluster-token"

# Set to false when a local proxy can forward remote traffic (Kubernetes sidecars,
# nginx, kubectl port-forward): such connections also arrive from 127.0.0.1.
allow_local_admin_bypass = true

# Peer-to-Peer (P2P) Fleet Pre-Warming
# When true, fleet-wide preload pulls 1/N of chunks from S3 per node and distributes
# the remaining chunks peer-to-peer across worker nodes to eliminate S3 egress storms.
p2p_preload_enabled = false

---

4. Master Configuration Key & Environment Variable Reference

Every critical setting in hypercache-agent.toml and hypercache-controller.toml can also be overridden via CLI flags or environment variables:

Config Key	Env Variable Override	Default	Description
socket_path	HYPERCACHE_SOCKET_PATH	"/run/hypercache/hypercache.sock"	Local Unix Domain Socket path (falls back to /tmp/hypercache/hypercache.sock). The env var is honored by the daemon, CLI and Python client.
storage_backing_mode	--	"auto"	"auto", "raw_block", or "filesystem" (O_DIRECT arena files).
filesystem_cache_paths	--	[]	List of mounted ext4/XFS directories for O_DIRECT arena files.
filesystem_arena_size_bytes	--	10737418240 (10 GiB)	Pre-allocated size per filesystem arena file in bytes.
filesystem_arena_preallocate	--	true	Reserve the arena's space at startup (refuse to start if it does not fit); false keeps sparse arenas.
device_discovery_mode	--	"auto"	"auto" (scan /sys/class/block) or "manual" (use block_devices list).
block_devices	--	[]	Explicit list of block devices when device_discovery_mode = "manual".
exclude_root_device	--	true	Unconditionally exclude OS root drive (/) from the storage pool.

---

How to Use HyperCache (Single-Node & Multi-Node Cluster)

Step 1: Run Pre-Flight Host Diagnostics (./hypercache check)

Before starting the daemon, run check (or doctor) to verify your config syntax, drive permissions, and O_DIRECT alignment support:

./hypercache -c configs/hypercache-agent.toml check

If any check fails or warns, ./hypercache check prints the exact remediation command (such as enabling storage_backing_mode = "filesystem" if your drives are already formatted and mounted).

---

Step 2: Start the HyperCache Daemon

Scenario A: Single-Node Production GPU Server

On a standalone GPU server, edit configs/hypercache-agent.toml with your S3/NFS settings and start the daemon. By default, it opens zero network TCP ports and listens only on the local Unix Domain Socket:

# Start worker daemon on discovered local NVMe drives
./hypercache -c configs/hypercache-agent.toml start

# Optional: Also enable Prometheus metrics on http://127.0.0.1:9110/metrics
./hypercache -c configs/hypercache-agent.toml start --metrics

Scenario B: Multi-Node GPU Cluster (Central Controller + Worker Fleet)

1. On the Central Controller Host:

   ./hypercache-admin -c configs/hypercache-controller.toml controller
   

2. On Each GPU Worker Node (with controller_url and cluster_auth_token set in configs/hypercache-agent.toml):

   ./hypercache -c configs/hypercache-agent.toml start --agent
   

3. Orchestrate the Fleet from the Controller:

   # View all registered GPU nodes, drive pools, and capacities
   ./hypercache-admin nodes
   
   # Pre-warm a model across all nodes (or filter by label with --selector "gpu=h100")
   ./hypercache-admin preload hypercache://s3/my-bucket/models/llama-3-70b/weights.safetensors --nodes all
   
   # Partition and pre-load a sharded training dataset across the cluster
   ./hypercache-admin preload-batch --prefix "s3://my-bucket/datasets/shard_" --sharded --nodes all
   

---

Step 3: Manage & Benchmark Local Cache from the CLI

On any worker node, use ./hypercache to inspect drives, preload weights, or benchmark your NVMe hardware's DMA throughput:

# Inspect auto-discovered NVMe drives and NUMA topology
./hypercache inspect

# Pre-load a model into cache and pin it so it is never evicted
./hypercache preload hypercache://s3/my-bucket/models/llama-3-8b/weights.pt --pin

# List all cached objects, their storage tier, sync status, and pin state
./hypercache ls

# Benchmark Striped NVMe DMA read throughput on your hardware
./hypercache bench --tier nvme --size-mb 5000

---

URI Addressing & Backend Routing

HyperCache routes requests automatically based on the URI scheme passed to Python (fsspec.open, torch.load) or the CLI (./hypercache preload):

URI Format	Target Backend	How HyperCache Resolves It
hypercache://s3/<bucket>/<key>	Amazon S3 / S3-Compatible	Fetches/writes <key> in explicit <bucket> using s3_endpoint from hypercache-agent.toml.
s3://<bucket>/<key>	Amazon S3 / S3-Compatible	Standard S3 URI alias; routes identically to hypercache://s3/<bucket>/<key>.
hypercache://<key>	Default Configured Backend	Uses authoritative_backend ("s3" + default s3_bucket, or "nfs" + nfs_mount_path) from hypercache-agent.toml.
hypercache://file/<abs/path>	POSIX / Shared NFS	Reads/writes directly to /<abs/path> on the local or NFS-mounted filesystem.
file:///<abs/path> or nfs://<rel/path>	POSIX / Shared NFS	Reads/writes to /<abs/path> (or <nfs_mount_path>/<rel/path>).

POSIX paths are confined to nfs_mount_path plus any nfs_allowed_paths. A URI such as file:///etc/shadow, or one escaping the roots through .. or a symlink, is rejected, so clients cannot use the daemon (which often runs as root for raw block access) to read or write arbitrary host files.

---

Python & PyTorch Integration Examples

Install the Python package from PyPI (pip install hypercache-io) into your training or inference environment. It exposes the hypercache module (import hypercache).

1. Drop-In PyTorch Model Loading (torch.load)

Importing hypercache automatically registers the hypercache:// protocol with Python's fsspec:

import fsspec
import torch
import hypercache  # Auto-registers the hypercache:// protocol

# Streams weights from local striped NVMe/RAM cache (auto-fetches from S3 on first miss)
checkpoint_uri = "hypercache://s3/my-bucket/models/llama-3-8b/weights.pt"

with fsspec.open(checkpoint_uri, "rb") as f:
    state_dict = torch.load(f, map_location="cuda:0")

model.load_state_dict(state_dict)

2. Native Safetensors & vLLM Zero-Copy Weight Loader

Stream .safetensors files directly into GPU or host tensors with optional selective tensor filtering and cache pinning (pinned=True):

from hypercache import (
    HyperCachevLLMWeightLoader,
    load_safetensors_state_dict,
    save_safetensors_state_dict,
)

# Load all (or selected) tensors from a .safetensors shard and pin in local cache
state_dict = load_safetensors_state_dict(
    "hypercache://models/llama-3-70b/model-00001-of-00008.safetensors",
    device="cuda:0",
    pinned=True,
)

# Stream multi-shard weights directly into a vLLM model runner
vllm_loader = HyperCachevLLMWeightLoader(pin_base_weights=True)
for name, tensor in vllm_loader.iter_shard_tensors(shard_uris, device="cuda:0"):
    pass

3. Training Checkpointing: Async Write-Back vs. Sync Write-Through

import fsspec
import torch
import hypercache

checkpoint_uri = "hypercache://s3/my-bucket/checkpoints/epoch_1.pt"

# Mode A: Asynchronous Write-Back (Default - Maximum Training Speed)
# Stages to local RAM/NVMe at hardware line rate and unblocks GPUs immediately;
# background worker flushes to S3/NFS asynchronously.
with fsspec.open(checkpoint_uri, "wb") as f:
    torch.save(model.state_dict(), f)

# Mode B: Synchronous Write-Through (Strict Remote Durability)
# Blocks f.close() until confirmed written to both local cache AND remote S3/NFS.
with fsspec.open(checkpoint_uri, "wb", write_through=True) as f:
    torch.save(model.state_dict(), f)

4. PyTorch Distributed Checkpoint (FSDP / DeepSpeed / DCP)

Save and restore per-rank distributed checkpoints at local hardware speed:

from hypercache import HyperCacheDCPStorageReader, HyperCacheDCPStorageWriter

# Save per-rank FSDP shard to local NVMe/RAM with background S3 sync
writer = HyperCacheDCPStorageWriter(
    "hypercache://s3/my-bucket/checkpoints/step_1000",
    rank=rank,
    world_size=world_size,
)
writer.save_rank_shard(model.state_dict())

# Restore per-rank FSDP shard via Direct Block DMA
reader = HyperCacheDCPStorageReader(
    "hypercache://s3/my-bucket/checkpoints/step_1000",
    rank=rank,
    world_size=world_size,
)
state_dict = reader.load_rank_shard()

5. Layer-by-Layer Pipelined Model Loader (Compute / I/O Overlap)

Start forward-pass compute on Layer 0 immediately while subsequent layers prefetch in the background:

from hypercache.pipeline import HyperCachePipelinedLoader

loader = HyperCachePipelinedLoader(prefetch_depth=2)

# Layer 0 arrives immediately; Layers 1..N prefetch in background threads during GPU compute
for layer_idx, layer_bytes in loader.stream_layers(layer_uris):
    run_layer_forward_pass(layer_idx, layer_bytes)

6. KV-Cache Prefix Block Store (LMCache / Dynamo KVBM Ready)

Offload and retrieve prompt prefix KV-cache blocks on striped local NVMe (or optional Host RAM):

from hypercache import HyperCacheKVStore

kv_store = HyperCacheKVStore(default_tier="nvme")
block_key = kv_store.compute_prefix_hash(
    token_ids=[128000, 9906, 1917],
    model_id="llama-3.1-70b",
    layer_idx=0,
)

# Store KV-cache block into local striped NVMe
kv_store.put_kv_block(block_key, kv_tensor, tier="nvme", pinned=True)

# Retrieve KV-cache block directly into pre-allocated GPU tensor
kv_store.get_kv_block(block_key, out_tensor=gpu_kv_buffer)

7. Multi-Node Dataset Sharding & Distributed DataLoader

Stream consistent-hashed dataset shards directly into PyTorch DataLoader workers on each node:

import fsspec
from torch.utils.data import DataLoader, Dataset
import hypercache

class ShardedTokenDataset(Dataset):
    def __init__(self, shard_uris):
        self.shard_uris = shard_uris

    def __getitem__(self, idx):
        with fsspec.open(self.shard_uris[idx], "rb") as f:
            return f.read()

dataset = ShardedTokenDataset(["hypercache://datasets/tokens/shard_000.bin", ...])
loader = DataLoader(dataset, batch_size=16, num_workers=4)

---

Fleet & Node Architecture

+===================================================================================+
|                                CENTRAL CONTROLLER HOST                            |
|                                                                                   |
|  [ Operator / Admin CLI ]                                                         |
|   ./hypercache-admin nodes                                                        |
|   ./hypercache-admin preload <uri> --nodes all                                    |
|   ./hypercache-admin preload-batch --prefix <uri> --sharded --nodes all           |
|         │                                                                         |
|         │ (Local Loopback http://127.0.0.1:9120 - Zero Config Admin Access)       |
|         ▼                                                                         |
|  +-----------------------------------------------------------------------------+  |
|  | HyperCache Controller Daemon (Port 9120)                                    |  |
|  | - Fleet Registry: Aggregates active nodes, NVMe capacities, and health      |  |
|  | - Fleet Dispatcher: Coordinates parallel preload / P2P fill / evict / purge |  |
|  +-----------------------------------------------------------------------------+  |
+===================================================================================+
                                         │
                 ┌───────────────────────┴───────────────────────┐
                 │ Authenticated Directives (Bearer Token)       │ Node Heartbeats (5s)
                 ▼                                               ▼
+=============================================+ +=============================================+
|             GPU WORKER NODE 01              | |             GPU WORKER NODE 02              |
|                                             | |                                             |
|  +---------------------------------------+  | |  +---------------------------------------+  |
|  | Agent Fleet & P2P API (Port 9115)     |◄─┼─┼─►| Agent Fleet & P2P API (Port 9115)     |  |
|  | - Preload/evict + P2P chunk/replica   |  | |  | - Preload/evict + P2P chunk/replica   |  |
|  +---------------------------------------+  | |  +---------------------------------------+  |
|  +---------------------------------------+  | |  +---------------------------------------+  |
|  | HyperCache Worker Engine              |  | |  | HyperCache Worker Engine              |  |
|  | - Moka W-TinyLFU Metadata + Slab Pool |  | |  | - Moka W-TinyLFU Metadata + Slab Pool |  |
|  | - Tier 1 RAM (/dev/shm) & Tier 2 NVMe |  | |  | - Tier 1 RAM (/dev/shm) & Tier 2 NVMe |  |
|  | - Direct Block DMA / GDS to GPU VRAM  |  | |  | - Direct Block DMA / GDS to GPU VRAM  |  |
|  | - Prometheus Exporter (Port 9110)     |  | |  | - Prometheus Exporter (Port 9110)     |  |
|  +---------------------------------------+  | |  +---------------------------------------+  |
+=============================================+ +=============================================+

---

Security, Network Ports & Authentication Model

HyperCache is designed with a zero-exposure default security posture:

1. Zero Open Ports in Single-Node Mode: Running ./hypercache -c configs/hypercache-agent.toml start without controller_url or --metrics opens zero TCP network ports. All communication between Python and the Rust daemon occurs over the local Unix Domain Socket (/run/hypercache/hypercache.sock).
2. Zero-Config Localhost Admin: Running ./hypercache-admin directly on the Controller host (127.0.0.1 / ::1) automatically bypasses token checks so operators can run ./hypercache-admin nodes or preload without flags. Set allow_local_admin_bypass = false on the controller whenever remote traffic can arrive through a local proxy (Kubernetes sidecars such as Istio/Envoy, nginx, kubectl port-forward), because those connections also originate from 127.0.0.1. The bundled Kubernetes manifest does this.
3. Bearer Token Authentication for Cluster Traffic: When cluster_auth_token (or HYPERCACHE_AUTH_TOKEN) is set, all network requests between the Controller (:9120) and Worker Node Agents (:9115) - including heartbeats, preload directives, P2P chunk transfers, and $k=2$ checkpoint replication - require Authorization: Bearer <token>. Unauthorized requests are rejected with HTTP 401 Unauthorized. Tokens are compared in constant time.
4. Agent API Never Runs Open on the Network: The agent API can purge the cache and write replicas to raw devices, so it refuses to start on a non-loopback agent_bind_address unless cluster_auth_token is set. The daemon keeps serving the local socket and logs the reason. In Kubernetes, the bundled NetworkPolicy additionally limits :9115 to the controller and peer agents.
5. Node Identity Protection: The controller rejects a registration that reuses a live node's node_id from a different source IP (HTTP 409), so a rogue registrant cannot redirect fleet traffic and the bearer token to another host.

Component / Service	Default Port / Socket	Default State	Who Should Have Access
Worker Local IPC	/run/hypercache/hypercache.sock	ON (Local file socket)	Local processes on the compute node
Prometheus Exporter	TCP :9110 (127.0.0.1)	OFF (Enable via --metrics)	Prometheus scraper / localhost
Worker Agent Fleet & P2P API	TCP :9115 (0.0.0.0)	OFF (Auto-enabled with controller_url)	Central Controller & peer GPU worker nodes (Private VPC)
Central Controller API	TCP :9120 (0.0.0.0)	ON when running hypercache-admin controller	GPU worker nodes & operator CLI (Private VPC)

---

Host RAM Footprint & Sizing Calculator

A common question from infrastructure engineers is: "How much host system RAM does the HyperCache daemon itself consume?"

When Tier 1 Host RAM caching is disabled (ram_cache_enabled = false), the Rust control plane and Moka metadata catalog have a tiny memory footprint - roughly ~125 MB of host RAM to index a 4 TB NVMe pool (~0.003% metadata-to-storage overhead):

• Rust Control Plane Base RSS: ~28 MB
• Moka W-TinyLFU + 4 MiB Chunk Routing Table (per 4 TB NVMe): ~96 MB (1,048,576 chunks x 80 bytes + frequency sketch)
• Transient Streaming Ring Buffers: ~16 MB (4 concurrent streams x 4 MiB)

You can calculate the exact memory footprint for your specific drive sizes, model counts, and multi-tenant container count using the included sizing tool:

python3 benchmarks/hypercache_ram_calculator.py --nvme-tb 16.0 --ram-tier-gb 32.0 --tenants 4

---

Prometheus & Grafana Monitoring Stack

HyperCache includes a pre-configured Prometheus + Grafana observability stack in docker-compose.yml and configs/grafana/.

# 1. Start the worker daemon with Prometheus metrics enabled (:9110/metrics)
./hypercache -c configs/hypercache-agent.toml start --metrics

# 2. Launch the pre-provisioned Prometheus (:9090) and Grafana (:3000) dashboard stack
docker compose up -d

Exported Prometheus metrics on http://<node-ip>:9110/metrics:

# Real-Time Hardware Throughput & Latency
hypercache_bandwidth_mbps
hypercache_local_metadata_latency_us
hypercache_remote_metadata_latency_us
hypercache_local_ttfb_us
hypercache_hit_ratio_percent

# Cloud Egress Savings & GPU Idle Time ROI
hypercache_estimated_cost_savings_dollars
hypercache_s3_egress_bytes_saved_total
hypercache_gpu_idle_time_saved_seconds

# Storage Pool & Cache Lifecycle
hypercache_active_devices_count
hypercache_storage_utilization_percent
hypercache_storage_used_bytes
hypercache_cached_objects_count
hypercache_evictions_total

---

Complete CLI Reference

1. GPU Worker Node Agent CLI (./hypercache)

Runs locally on each GPU or CPU compute node:

Command	Action
./hypercache -c configs/hypercache-agent.toml check	Runs pre-flight host diagnostics (config, permissions, raw drives, O_DIRECT, RAM pool, sockets). Alias: doctor, preflight.
./hypercache -c configs/hypercache-agent.toml start	Starts worker daemon in secure local mode (zero network ports opened by default).
./hypercache -c configs/hypercache-agent.toml start --ram	Starts worker daemon with Tier 1 Host RAM cache enabled.
./hypercache -c configs/hypercache-agent.toml start --metrics	Starts worker daemon with Prometheus metrics exporter enabled (:9110).
./hypercache -c configs/hypercache-agent.toml start --agent	Explicitly enables the Node Agent Fleet & P2P HTTP API (:9115).
./hypercache -c configs/hypercache-agent.toml start --devices /dev/nvme1n1,/dev/nvme2n1	Starts the daemon targeting explicit block devices (manual mode).
./hypercache ls	Lists local cached checkpoints, sizes, chunk counts, tier (RAM / NVMe), sync status, and pin state.
./hypercache preload <uri> [--tier ram|nvme] [--pin]	Pre-loads a model from S3/NFS and optionally pins it against eviction.
./hypercache preload --file <path> [--pin]	Batch pre-loads multiple checkpoints listed in a text file.
./hypercache rm <uri>	Evicts a specific object and reclaims its 4 MiB RAM/NVMe blocks into the free pool.
./hypercache refresh <uri>	Evicts and re-ingests fresh weights from authoritative S3 or NFS.
./hypercache purge	Clears all cached models from RAM & NVMe and resets block allocators.

---

2. Central Fleet Administration CLI (./hypercache-admin)

Runs on the Controller host (zero configuration required on 127.0.0.1 loopback):

Command	Action
./hypercache-admin -c configs/hypercache-controller.toml controller	Starts the Central Cluster Controller / Fleet Coordinator daemon on port 9120.
./hypercache-admin nodes	Displays cluster topology dashboard of all registered nodes, drives, capacities, and health.
./hypercache-admin preload <uri> --nodes all	Dispatches parallel pre-load (or P2P chunk distribution) across all online nodes.
./hypercache-admin preload <uri> --selector "gpu=h100"	Dispatches pre-load targeting specific node labels.
./hypercache-admin preload-batch --prefix <PREFIX> --nodes all --sharded	Partitions and pre-loads a sharded dataset across cluster nodes using consistent hashing.
./hypercache-admin evict <uri> --nodes all	Dispatches parallel model eviction across all nodes.
./hypercache-admin purge --nodes all	Dispatches cache purge and block allocator reset across all nodes.
./hypercache-admin status	Shows aggregate fleet metrics (nodes online, total NVMe pool, cache utilization).

---

Running Tests & Verification Suites

# Full release verification harness: static checks (fmt, clippy, versions, zero-emoji),
# Rust + Python suites, end-to-end daemon / fleet scenarios on real binaries, live S3
# (throwaway versitygw container), a clean Linux container run, the Docker image with
# host access to the containerized daemon, and the Kubernetes manifest on minikube.
scripts/verify_release.sh            # everything (Docker / minikube stages skipped if unavailable)
scripts/verify_release.sh --quick    # static, rust, python only

# 1. Run the Rust Control Plane unit & integration test suite (77 tests + 6 live S3 tests)
cargo test --manifest-path control-plane/Cargo.toml

# 2. Run the Python Data Plane & framework integration test suite (34 tests)
.venv/bin/pytest client-py/tests

# 2b. End-to-end scenarios against the release binaries (no daemon needed beforehand)
.venv/bin/python scripts/e2e/hypercache_e2e.py daemon fleet

# 3. Run end-to-end PyTorch verification & endurance suites (with daemon running)
.venv/bin/python benchmarks/real_world_ai_test_suite.py
.venv/bin/python benchmarks/verify_writethrough_and_writeback.py
.venv/bin/python benchmarks/verify_advanced_optimizations.py

---

License

HyperCache is licensed under the Apache License 2.0.