UVtools

Download the latest version at:

https://github.com/sn4k3/UVtools/releases/latest

To auto-install on Windows (package manager):

• Winget: winget install -e --id PTRTECH.UVtools
• Chocolatey: choco install -y uvtools

Note: Winget is included on Windows 10 with recent updates and Windows 11 by default.

To auto-install on Linux and macOS:

bash -c "$(curl -fsSL https://raw.githubusercontent.com/sn4k3/UVtools/master/Scripts/install-uvtools.sh)"

To downgrade to a previous version:

# Replace x.x.x by the version you want to install
bash -c "$(curl -fsSL https://raw.githubusercontent.com/sn4k3/UVtools/master/Scripts/install-uvtools.sh)" -- x.x.x

MSLA/DLP, file analysis, calibration, repair, conversion and manipulation

This simple tool can give you insight of supports and find key failures.
Did you forget what resin or other settings you used on a project? This can also save you, check every setting that was used with or change them!

• Facebook group: https://www.facebook.com/groups/uvtools
• Discussions: https://github.com/sn4k3/UVtools/discussions

Why this project?

I don't own a Prusa SL1 or any other resin printer, for now I’m only an FDM user with Prusa MK3 and an Ender3. PrusaSlicer is my only choice, why? Because I think it's the best and features more, at least for me, simple but powerful.

So why this project? Well, in fact, I’m looking for a resin printer. I like to study and learn first before buying and get good and don't regret. While inspecting, I found that resin printers firmwares are not as universal as FDM, too many file formats and there before each printer can use their own property file, this of course limit the software selection. For example, only PrusaSlicer can slice SL1 files. So with that in mind, I'm preparing when I get a resin printer in the future, I can use PrusaSlicer instead of others. I've explored the other slicers and again, no one gives me joy, and I feel them unstable, many users slice model on PrusaSlicer just to get those supports and export STL to load in another, that means again PrusaSlicer is on the win side, the problem is they can't slice directly on PrusaSlicer, so, in the end, my project aims to do almost that, configure a printer on PrusaSlicer, e.g.: EPAX X1, slice, export a file, convert SL1 to native printer file and print.

Please note I don't own any resin printer! All my work is virtual and calculated, so, use experimental functions with care! Once things got confirmed, a list will show. But also, I need victims for a test subject. Proceed at your own risk!

Features

• View, modify and extract layer by layer
• View, modify and extract thumbnails
• Export file to a folder
• View and edit all used properties/settings
• Many tools to mutate and filter layers
• Check for issues and repair/remove them as possible:
  • Islands
  • Overhangs
  • Resin traps
  • Suction cups
  • Touching bounds
  • Print height
  • Empty layers
• Suggestions and auto corrections:
  • Layer height
  • Bottom layer count
  • Wait time before cure
  • Wait time after cure
  • Transition layer count
  • Model position
• Convert format to another format
• Calibration tests
• Portable (No installation needed)

以上為 README 的開頭部分。其餘內容請閱讀原文。 檢視完整 README ↗