neuron-explorer
Steering-first neuron explorer for Qwen3.5-4B: push every MLP neuron, keep every rollout, browse the results
Annota turns a Waveshare ESP32-S3 1.54" e-paper board into a standalone voice-note device: record straight from the onboard mic, browse the SD card on a two-button e-paper UI, and send any clip off to
Developer toolsC · C++GitHub @corradoignotiOnlineOwner unconfirmed
Have you tried it? One tap is enough. No sign-in needed.
Annota turns a Waveshare ESP32-S3 1.54" e-paper board into a standalone voice-note device: record straight from the onboard mic, browse the SD card on a two-button e-paper UI, and send any clip off to an AI provider for transcription
Taken from the repository README
Loading the full README. The saved excerpt is shown below.
Firmware for the Waveshare ESP32-S3-ePaper-1.54: a 1.54" 200x200 mono
e-paper panel, 2 onboard buttons, and an onboard ES8311 speaker/mic codec,
on an ESP32-S3. It turns the board into a standalone MP3/WAV browser and
recorder companion: it scans an SD card's root for audio files, lists them
on a small button-driven LVGL UI, can play them back or record a new voice
memo from the onboard mic, and can send any of them off to an AI provider
for transcription, saving the result as a sibling .txt file.Read the full README ↗The full README is unavailable right now. Read it at the original link. The saved excerpt is shown below.
Firmware for the Waveshare ESP32-S3-ePaper-1.54: a 1.54" 200x200 mono
e-paper panel, 2 onboard buttons, and an onboard ES8311 speaker/mic codec,
on an ESP32-S3. It turns the board into a standalone MP3/WAV browser and
recorder companion: it scans an SD card's root for audio files, lists them
on a small button-driven LVGL UI, can play them back or record a new voice
memo from the onboard mic, and can send any of them off to an AI provider
for transcription, saving the result as a sibling .txt file.Read the full README ↗