neuron-explorer
Steering-first neuron explorer for Qwen3.5-4B: push every MLP neuron, keep every rollout, browse the results
Bluetooth LE Gamepad library for the ESP32
Developer toolsC++ · CGitHub @lemmingDevSelf-installOwner unconfirmed
Paste into Claude or ChatGPT for installation instructions suited to your environment.
Have you tried it? One tap is enough. No sign-in needed.
Loading the full README. The saved excerpt is shown below.
Bluetooth LE Gamepad library for the ESP32. Supports three operating modes: Generic HID, SInput (SDL3 native), and XInput (Xbox emulation). This library depends only on NimBLE-Arduino and has no chip-specific code, so it should work on any Espressif MCU with a BLE radio. The following are currently built and compile-tested in CI (see main.yml): Other BLE-capable variants (e.g. ESP32-C2, ESP32-H2) are likely to work too, but aren't currently covered by CI. Note that plain ESP32-S2 has no Bluetooth radio at all, so it can't run this library. [README 설치·사용 부분 발췌] Quick StartRead the full README ↗
The full README is unavailable right now. Read it at the original link. The saved excerpt is shown below.
Bluetooth LE Gamepad library for the ESP32. Supports three operating modes: Generic HID, SInput (SDL3 native), and XInput (Xbox emulation). This library depends only on NimBLE-Arduino and has no chip-specific code, so it should work on any Espressif MCU with a BLE radio. The following are currently built and compile-tested in CI (see main.yml): Other BLE-capable variants (e.g. ESP32-C2, ESP32-H2) are likely to work too, but aren't currently covered by CI. Note that plain ESP32-S2 has no Bluetooth radio at all, so it can't run this library. [README 설치·사용 부분 발췌] Quick StartRead the full README ↗