Record InBody and blood test results as photos, and view body composition trends and recommended values together with FitLog.
AI translation
인바디와 피검사 결과지를 사진으로 기록하고, 체성분 추이와 수치별 권장사항을 함께 보는 FitLog
HealthTypeScript · CSSGitHub @2xteamOnlineOwner unconfirmed
Have you tried it? One tap is enough. No sign-in needed.
No updates detected yet. GitHub releases will appear here.
Owners of public repositories under a personal GitHub account can sign in to verify ownership and manage the introduction themselves. No administrator approval is needed.
Sign in, generate a verification file, and commit it to this repository’s default branch within 30 minutes. Files on other branches or forks do not count. Then check the file below to manage the project without administrator approval. Keep the file to retain your access.
If needed, you will go to sign-in. After signing in, return here and press your chosen verification button again.
Run /nomorevibe verify in your project folder to verify ownership and manage the introduction yourself.
Verify in one minuteAsk about other verification options
건강앱
Translation pending
Taken from the repository README
Loading the full README. The saved excerpt is shown below.
fitlog.myjane.co.kr — 인바디 결과지를 사진으로 기록하고 체성분 추이를 관리하는 앱. SnapWord·SnapNote와 회원을 공유한다. • 앱 데이터: fit DB (measurements, weights, activities, chatthreads) • 회원: user DB의 users 컬렉션 — models/User.ts의 useDb("user") • 세션: 쿠키 snap_user, 도메인 .myjane.co.kr → 세 앱 간 로그인 유지 ⚠️ Vercel에서 NEXT_PUBLIC_COOKIE_DOMAIN은 반드시 Config 타입으로 등록해야 한다. Secret으로 등록하면 브라우저 번들에 값이 주입되지 않아 쿠키가 host-only가 된다. heightCm / gender / birthYear는 FitLog에서만 입력받는 필드이며 공용 users 문서에 저장한다. 기종(270 · 270S · 720 · 970 · 구형)마다 인쇄 항목이 달라 대부분 선택값이다. 수치 항목은 { value, min, max } 형태로, 결과지에 인쇄된 표준범위까지 함께 저장한다.Read the full README ↗
fitlog.myjane.co.kr — 인바디 결과지를 사진으로 기록하고 체성분 추이를 관리하는 앱.
스택: Next.js 15 · Node.js 22 · MongoDB Atlas(
fitDB) · OpenAI Vision · Cloudflare R2 · Vercel
SnapWord·SnapNote와 회원을 공유한다.
fit DB (measurements, weights, activities, chatthreads)user DB의 users 컬렉션 — models/User.ts의 useDb("user")snap_user, 도메인 .myjane.co.kr → 세 앱 간 로그인 유지
⚠️ Vercel에서 NEXT_PUBLIC_COOKIE_DOMAIN은 반드시 Config 타입으로 등록해야 한다.
Secret으로 등록하면 브라우저 번들에 값이 주입되지 않아 쿠키가 host-only가 된다.heightCm / gender / birthYear는 FitLog에서만 입력받는 필드이며 공용 users 문서에 저장한다.
기종(270 · 270S · 720 · 970 · 구형)마다 인쇄 항목이 달라 대부분 선택값이다.
| 그룹 | 내용 |
|---|---|
composition | 체수분(세포내/외) · 단백질 · 무기질 · 골무기질 · 체지방량 · 근육량 · 제지방량 · 체중 |
muscleFat | 골격근량 |
obesity | BMI · 체지방률 · 복부지방률 |
segmental | lean / fat / ecwRatio × 5부위 (kg · % · 등급) |
evaluation | 인바디점수 · 위상각 · 신체균형 · 비만평가 · 영양평가 · 신체강도 · 건강진단 |
control | 적정체중 · 체중/지방/근육 조절 |
research | 기초대사량 · 비만도 · 내장지방(레벨·단면적) · 허리둘레 · FFMI · FMI · BCM · BMC · AC · AMC |
impedance | 주파수별 RA/LA/TR/RL/LL |
derived | 앱이 계산: SMI(골격근지수), 허리/키 비율 |
etc | 스키마에 없는 항목 — label/value/unit으로 보관하고 화면에 그대로 나열 |
수치 항목은 { value, min, max } 형태로, 결과지에 인쇄된 표준범위까지 함께 저장한다.
날짜당 1건(userId + measuredDate 유니크). 하루에 여러 번 측정해도 체성분이 변한 게 아니라
식사·수분·운동에 따른 측정 조건 차이라 기록 가치가 없다. 같은 날 다시 올리면 교체한다.
단 measuredAt에는 시각까지 남겨 측정 조건 비교에 쓴다.
체중계는 매일, 인바디는 몇 달에 한 번이라 분리했다. 그래프에서 함께 그린다.
인바디 결과지는 내부 계산이 맞아떨어진다. 이 성질로 Vision의 숫자 오인식을 잡는다
(lib/inbody.ts의 validateMeasurement).
| 검사 | 허용 오차 |
|---|---|
| 체수분 + 단백질 + 무기질 + 체지방 = 체중 | ±0.6kg |
| BMI = 체중 ÷ (키m)² | ±0.4 |
| 체지방률 = 체지방량 ÷ 체중 × 100 | ±0.8%p |
| 제지방량 = 체중 − 체지방량 | ±0.6kg |
| 골격근량 ≤ 제지방량 | — |
추출 결과는 저장 전 반드시 검토 화면을 거치며, 검증에 걸린 필드를 표시한다.
npm install
cp .env.example .env.local # 값 채우기
npm run dev # http://localhost:3003
포트 3003 — SnapWord(3000)·SnapNote(3001)·myjane(3002)과 동시 실행용.
measurements, weights) 및 필드 카탈로그POST /api/measurements/extract, GET·POST /api/measurementsetc 목록 · 원본 사진)