A deterministic code formatter for Lua 5.1, 5.2, 5.3, 5.4, LuaJIT, Luau and CfxLua/FiveM Lua, built using full-moon.
StyLua is inspired by the likes of prettier, it parses your Lua codebase, and prints it back out from scratch,
enforcing a consistent code style.
StyLua mainly follows the Roblox Lua Style Guide, with a few deviations.
Installation
There are multiple ways to install StyLua:
With Github Releases
Pre-built binaries are available on the GitHub Releases Page.
By default, these are built with all syntax variants enabled (Lua 5.2, 5.3, 5.4, LuaJIT and Luau), to cover all possible codebases.
See configuring runtime syntax selection if you need to select a particular syntax of Lua to format.
Alternatively, see installing from crates.io on how to install a particular flavour of StyLua.
From Crates.io
If you have Rust installed, you can install StyLua using cargo.
By default, this builds for just Lua 5.1.
You can pass the --features <flag> argument to add extra syntax variants:
cargo install stylua
cargo install stylua --features lua52
cargo install stylua --features lua53
cargo install stylua --features lua54
cargo install stylua --features luajit
cargo install stylua --features luau
You can specify multiple features at once, and then use configuration in a .stylua.toml file to defer syntax selection to runtime.
GitHub Actions
The stylua-action GitHub Action can install and run StyLua.
This action uses the prebuilt GitHub release binaries, instead of running cargo install, for faster CI startup times.
pre-commit
You can use StyLua with pre-commit.
There are 3 possible pre-commit hooks available:
stylua: installs via cargo - requires the Rust toolchainstylua-system: runs a stylua binary available on the PATH. The binary must be pre-installedstylua-github: automatically installs the relevant prebuilt binary from GitHub Releases
Add the following to your .pre-commit-config.yaml file:
- repo: https://github.com/JohnnyMorganz/StyLua
rev: v2.6.0
hooks:
- id: stylua # or stylua-system / stylua-github
npm
StyLua is available as a binary published to npm as @johnnymorganz/stylua-bin.
This is a thin wrapper that installs the binary and makes it available through npm / npx.
npx @johnnymorganz/stylua-bin --help
StyLua is also available as a WASM library at @johnnymorganz/stylua.
It is usable in Node.js, or in the browser (using a bundler).
Docker
StyLua is available on the Docker Hub.
If you are using Docker, the easiest way to install StyLua is:
COPY --from=JohnnyMorganz/StyLua:2.6.0 /stylua /usr/bin/stylua
Homebrew
StyLua is available on macOS via the Homebrew package manager.
brew install stylua
pip / uv
You can install StyLua using pip / uv, by passing in the git repository as the archive URL
pip install git+https://github.com/johnnymorganz/stylua
uv tool install git+https://github.com/johnnymorganz/stylua
Other Installation Methods
aftman add johnnymorganz/[email protected]
- A community maintained package repository. Please note, these packages are maintained by third-parties and we do not control their packaging manifests.
Other Editor Integrations
Note that these integrations require the StyLua binary to already be installed and available on your system.
Usage
Once installed, pass the files to format to the CLI:
stylua src/ foo.lua bar.lua
This command will format the foo.lua and bar.lua file, and search down the src directory to format any files within it.
StyLua can also read from stdin, by using - as the file name.
Glob Filtering
By default, when searching through a directory, StyLua looks for all files matching the glob **/*.lua (or **/*.luau when luau is enabled) to format.
You can also specify an explicit glob pattern to match against when searching:
stylua --glob '**/*.luau' -- src # format all files in src matching **/*.luau
stylua -g '*.lua' -g '!*.spec.lua' -- . # format all Lua files except test files ending with `.spec.lua`
Note that the -g/--glob argument can take multiple strings at once, so -- is required to separate between the glob patterns and the files to format.
By default, glob filtering (and .styluaignore files) are only applied during directory traversal and searching.
Files passed directly (e.g. stylua foo.txt) will override the glob / ignore and always be formatted.
To disable this behaviour, pass the --respect-ignores flag (stylua --respect-ignores foo.txt).
Filtering using .styluaignore
You can create a .styluaignore file, with a format similar to .gitignore.
Any files matching the globs in the ignore file are ignored by StyLua.
For example, for a .styluaignore file with the following contents:
vendor/
running stylua . will ignore the vendor/ directory.
Filtering when using stdin
If you are formatting stdin by specifying - as the filename (usually as part of an editor integration)
you can optionally provide the filename via --stdin-filepath. To respect glob or .styluaignore filtering, pass --respect-ignores.
stylua --respect-ignores --stdin-filepath src/foo.lua -
--check: Checking files for formatting
To check whether files require formatting (but not write directly to them), use the --check flag.
It will take files as input, and output a diff to stdout instead of rewriting the file contents.
If there are any files that require formatting, StyLua will exit with status code 1.
There are different styles of output available:
--output-format=standard: output a custom diff (default)--output-format=unified: output a unified diff, consumable by tools like patch or delta--output-format=json: output JSON representing the changes, useful for machine-readable output--output-format=summary: output a summary list of file paths that are incorrectly formatted
--verify: Verifying formatting output
As a safety measure, you can use the --verify flag to verify the output of all formatting before saving the file.
If enabled, the tool will re-parse the formatted output to verify if the AST is still valid (no syntax errors) and is similar to the input (possible semantic changes).
This is useful when adopting StyLua in a large codebase, where it is difficult to manually check all formatting is correct.
Note that this may produce false positives and negatives - we recommend manual verification as well as running tests to confirm.
Ignoring parts of a file
To skip formatting a particular part of a file, you can add -- stylua: ignore before it.
This is useful if there is a particular style you want to preseve for readability, e.g.:
-- stylua: ignore
local matrix = {
{ 0, 0, 0 },
{ 0, 0, 0 },
{ 0, 0, 0 },
}
To skip a block of code, use -- stylua: ignore start and -- stylua: ignore end:
local foo = true
-- stylua: ignore start
local bar = false
local baz = 0
-- stylua: ignore end
local foobar = false
Note that ignoring cannot cross scope boundaries - once a block is exited, formatting is re-enabled.
Formatting Ranges
To format a specific range within a file, use --range-start <num> and/or --range-end <num>.
Both arguments are inclusive and optional - if an argument is not provided, the start/end of the file is used respectively.
Only whole statements lying within the range are formatted.
If part of a statement falls outside the range, the statement is ignored.
In editors, Format Selection is supported.
Requires Sorting
StyLua has built-in support for sorting require statements. We group consecutive require statements into a single "block",
and then requires are sorted only within that block. Blocks of requires do not move around the file.
StyLua only considers requires of the form local NAME = require(EXPR), or const NAME = require(EXPR) in Luau,
and sorts lexicographically based on NAME.
(StyLua can also sort Roblox services of the form local NAME = game:GetService(EXPR), or const NAME = game:GetService(EXPR) in Luau)
Requires sorting is off by default. To enable it, add the following to your stylua.toml:
[sort_requires]
enabled = true
Language Server Mode
StyLua can run as a language server, connecting with language clients that follow the Language Server Protocol.
It will then respond to textDocument/formatting and textDocument/rangeFormatting requests.
Formatting is only performed on files with a lua or luau language ID.
If the initialization option respect_editor_formatting_options is set to true, the formatting handler will override the configurations indent-width and indent-type with values from FormattingOptions.
You can start the language server by running:
stylua --lsp
StyLua will listen to LSP messages on stdin and respond on stdout.
Configuration
StyLua has opinionated defaults, but also provides a few options that can be set per project.
Finding the configuration
The CLI looks for a stylua.toml or .stylua.toml starting from the directory of the file being formatted.
It will keep searching upwards until it reaches the current directory where the tool was executed.
If not found, we search for an .editorconfig file, otherwise fall back to the default configuration.
This feature can be disabled using --no-editorconfig.
See EditorConfig for more details.
Use --config-path <path> to provide a custom path to the configuration.
If the file provided is not found/malformed, StyLua will exit with an error.
By default, StyLua does not search further than the current directory.
Use --search-parent-directories to recursively search parent directories.
This will keep searching ancestors and, if not found, will then look in $XDG_CONFIG_HOME / $XDG_CONFIG_HOME/stylua / $HOME/.config and $HOME/.config/stylua.
Note: enabling searching outside of the current directory is NOT recommended due to possibilities of conflicting formatting:
It is recommended to keep a .stylua.toml file in your project root so that other developers can make use of the same configuration.
If a project uses the default configuration of StyLua without a configuration file present, enabling external searching may cause conflicting formatting.
Configuring Runtime Syntax Selection
By default, StyLua releases comes with all flavours of Lua bundled into one binary, with a union of all syntax styles.
We do this to make it easier to get started with StyLua on any codebase or project using Lua.
However, there are times where the union of syntaxes collide, causing issues. For example, Lua 5.2's goto label syntax
(::label::) conflicts with Luau's type assertion syntax (x :: number), and the latter ends up taking priority.
To disambiguate a particular syntax style for your codebase, set syntax = "Style" in your .stylua.toml file, e.g.:
syntax = "Lua52"
Alternatively, you can specify it on the command line, with stylua --syntax lua52 ...
Options
StyLua only offers the following options:
[!NOTE]
When specifying the option on the command line, replace the underscore with a dash, e.g., indent_type becomes --indent-type.
| Option | Default | Description |
|---|
syntax | All | Specify a disambiguation for the style of Lua syntax being formatted. Possible options: All (default), Lua51, Lua52, Lua53, Lua54, LuaJIT, Luau, CfxLua |
column_width | 120 | Approximate line length for printing. Used as a guide for line wrapping - this is not a hard requirement: lines may fall under or over the limit. |
line_endings | Unix | Line endings type. Possible options: Unix (LF) or Windows (CRLF) |
indent_type | Tabs | Indent type. Possible options: Tabs or Spaces |
indent_width | 4 | Character size of single indentation. If indent_type is set to Tabs, this option is used as a heuristic to determine column width only. |
quote_style | AutoPreferDouble | Quote style for string literals. Possible options: AutoPreferDouble, AutoPreferSingle, ForceDouble, ForceSingle. AutoPrefer styles will prefer the specified quote style, but fall back to the alternative if it has fewer string escapes. Force styles always use the specified style regardless of escapes. |
call_parentheses | Always | Whether parentheses should be applied on function calls with a single string/table argument. Possible options: Always, NoSingleString, NoSingleTable, None, Input. Always applies parentheses in all cases. NoSingleString omits parentheses on calls with a single string argument. Similarly, NoSingleTable omits parentheses on calls with a single table argument. None omits parentheses in both cases. Note: parentheses are still kept in situations where removal can lead to obscurity (e.g. foo "bar".setup -> foo("bar").setup, since the index is on the call result, not the string). removes all automation and preserves parentheses only if they were present in input code: consistency is not enforced. |
Default stylua.toml, note you do not need to explicitly specify each option if you want to use the defaults:
syntax = "All"
column_width = 120
line_endings = "Unix"
indent_type = "Tabs"
indent_width = 4
quote_style = "AutoPreferDouble"
call_parentheses = "Always"
collapse_simple_statement = "Never"
space_after_function_names = "Never"
block_newline_gaps = "Never"
[sort_requires]
enabled = false
